This servo features Hitecs digital, programmable circuit for incredible resolution, centering and holding torque; also featuring ultra strong karbonite gears, a top-ball bearing, and over 40 ounces/inches of torque with a quick transit time of 0.11 sec at 6 volts. This will no doubt be the choice for high performance micro helicopters and light duty robotic projects. We offer the new HS-A5076HB servo in several configurations, 90° stock rotation, 180° modified rotation (programmed) and reverse rotation.
Programable Features:
- Dead Band Width
- Direction of Rotation
- Speed of Rotation (slower)
- End Points (up to 120 degrees)
- Neutral Points
- Fail Safe On/Off
- Fail Safe Points
- Resolution (default is set at high)
- Overload Protection (default is off)
A = .425” (10.8mm)
B = .358” (9.1mm)
C = .984” (25mm)
E = .205” (5.2mm)
F = .898” (22.8mm)
G = .384” (9.75mm)
H = .823” (20.9mm)
J = 1.555” (39.5mm)
K = .331” (8.4mm)
L = .173” (4.4mm)
M = 1.102” (28mm)
X = .126” (3.2mm)
| Control System: |
3+Pulse Width Control 1500usec Neutral |
Required Pulse: |
3-5 Volt Peak to Peak Square Wave |
Operating Voltage: |
4.8-6.0 Volts |
| Operating Temperature Range: |
-20° to +60° C (-4°F to +140°F) |
| Operating Speed (4.8V): |
(4.8V): 0.14 sec/60° at no load |
Operating Speed (6.0V): |
(6.0V): 0.11 sec/60° at no load |
| Stall Torque (4.8V): |
34.7oz/in. (2.5kg.cm) |
| Stall Torque (6.0V): |
48.6 oz/in. (3.5kg.cm) |
| Standing Torque (4.8V): |
83.32 oz/in. (6kg.cm |
Standing Torque (6.0V): |
42oz/in. (3.0kg.cm)
|
Operating Angle: |
40 Deg.one side pulse traveling 400usec |
Direction: |
Clockwise/Pulse Traveling 1500 to 1900usec |
| Current Drain (4.8V): |
200mA/idle and 2.0 amps at lock/stall |
| Current Drain (6.8V): |
240mA/idle and 3.0 amps at lock/stall |
| Dead Band Width: |
2usec
|
| Motor Type: |
Carbon Brush |
| Potentiometer Drive: |
6 Slider Indirect Drive |
| Bearing Type: |
Dual Ball Bearing MR106
|
| Gear Type |
Karbonite Gears |
| Connector Wire Length: |
7" (178mm) |
| Dimensions: |
1.14" x 0.51"x 1.18" (30 x 10 x 34mm)
|
Weight: |
1.43g
|
