• Model: FYTL200B
  • Weight: 368 grams
  • Brand: Tarot
Add to Wishlist Add to Compare

Tarot TL200B Mini 200mm 4-Axis Quadcopter Frame Kit Super Combo

Current Reviews: 0  |  Add Your Review

Tarot TL200A Mini 200mm 4-Axis Quadcopter Frame Kit
Tarot Mini 250 through the machine frame TL250A
Quantity :
Price :


  • Super lightweight,allows the camera,battery,ESC, image transmission and antenna to be plugged directly on the frame or soldered on the PCB board,much less wiring,easy to install.
  • Using recommended 15c/11.1v1000mah battery,can enjoy 9 min flight.
  • Compatible with 2.4G/5.8G transmitter,enjoy the fun of DIY.
  • Equipped with Tarot series camera,antenna,motor,ESC, image transmission, propeller and flight controller,you can assemble your own characteristic quadcopter.



  • Wheelbase: 200mm
  • Empty Rack Height / Assembly height: 43mm / 85.8mm
  • Empty Frame Length / Assembly Length: 168mm / 185mm
  • Empty Frame Width / Assembly width: 168mm / 168mm


    Tarot TL300M Camera Lens 2.8mm
    Camera Angle 120°
    Definition 600TV Lines (HD)
    Effective pixels PAL = 720 (H) × 576 (V) / NTSC = 720 (H) × 487 (V)
    Video system NTSC / PAL
    Sensitive chip 1/3 inch HD Color CMOS
    Video Output 1.0Vp-p / 75Ω
    Minimum illumination 0.008Lux (ultra low-light)
    Power consumption 40MA ± 10%
    Operating voltage DC5-15V ± 10%
    Synchronization System Internal Synchronization
    SNR >50dB
    An electronic shutter (N) 1 / 60-1 / 10000s, (P) 1 / 50-1 / 10000s
    Working temperature 0 degree ~ 45 degree
    Weight 15g
    Size 21*26*30 ± 3mm
    Tarot TL300N Image Receiver Weight 10.9 G (without antenna)
    Dimension 28 x 46 x 40 mm
    Working frequency 5645-5945 MHZ
    Channel 4 bands / 32 channels
    Channel selection 5-DIP switch
    Receiving Sensitivity -85 dbm
    Input Voltage DC 7-26V (2-6S)
    Antenna Adaptor RP SMA 50Ω
    Working Temperature -10 ~ 60 degrees
    Frequency FM/PLL
    Output 2.5mm 4 pins AV output
    Power input 3.5mm (exterior) 1.3 mm (interior) DC
    Tarot TL300N Transmitter module Weight 8.3G (without antenna)
    Dimension 21 x 33 x 7.5 mm
    Working Frequency 5645-5945MHz
    Channel 4 bands / 32 channel
    Channel selection 5-DIP switch
    Output Power 27.5 dbm (600mw)
    Input Voltage DC 7-26V (2-6S)
    Output Voltage 5V 1A
    Antenna Adaptor RP SMA 50Ω
    Working Temperature -10 ~ 60 degrees
    Frequency FM
    Tarot TL300K Antenna
     
    		 Transmission frequency 5800MHZ
    Gain 2.0dBi-2.5dBi
    Note Bobby <1.5
    Directivity Omnidirectional
    Horizontal beam width 45 °
    Vertical beam width 45 °
    Impedance 50Ω
    Antenna adapter RP-SMA Male
    Polarization circular polarization
    Tarot TL300H Motor Power Supply 2-3S
    Prop Diameter 5mm
    Max Thrust 460g
    Interphase Resistance ≤4mΩ
    Stator Diameter 18mm
    No-load Current 0.4A-0.7A
    Stator End Thickness 6.0
    Stator End Quantity 12
    Motor Pole Number 14
    Rotate Speed 2280KV ± 5%
    Motor Outer Diameter 23mm
    Axis Diameter 2mm
    Motor Length 26.5mm
    Motor Weight 18g
    Tarot TL300E Propeller Spec. 5 inch 3-leaf 
    Tarot TL300G ESC Spec. 12A(with BEC)
    Tarot TL300D Flight controller Spec. CC3D Openpilot




  • TL200A Kit x 1
  • TL300M camera x 1
  • TL300N FPV Transmitter Combo x 1
  • TL300D CC3D x 1
  • TL300K 5.8g Antenna x 1
  • TL300E 5 inch 3-leaf propeller x 1
  • TL300G 12A ESC x 4
  • TL300H 1860-2280KV brushless motor x 4
  • English manual x 1