HItec HSG-5083MG Micro Tail Servo

Price :

US$40.90US$19.9051% off Report Cheaper Price

The extreme speed or the HSG-5083MG Digital Micro Tail Rotor servo was built specifically for the HG-5000 Servo Gyro to obtain optimum performance in electric helis. The HSG-5083MG servo is compatible with a 960usec speed and 333Hz framerate.
(Be sure that your Gyro is compatible prior to ordering)

A = .510” (12.9mm)
B = .402” (10.2mm)
C = .976” (24.8mm)
E = .264” (6.7mm)
F = .872” (22.15mm)
G = .409” (10.4mm)
H = .772” (19.6mm)
J = 1.565” (39.75mm)
K = .390” (9.9mm)
L = .179” (4.55mm)
M = 1.136” (28.85mm)
X = .140” (3.56mm)

Required Pulse:	3-5 Volt Peak to Peak Square Wave
Operating Voltage Range:	4.8 Volts
Operating Temperature Range:	-20° to +60° C (-4°F to +140°F)
Operating Speed (4.8V):	0.07sec/60° at no load
Connector Wire Length:	7" (178mm)
Stall Torque (4.8V):	34.7oz/in. (2.5kg.cm)
Direction:	Clockwise/Pulse Traveling 480-1300 usec
Continuous Rotation Modifiable:	Yes
Current Drain (4.8V):	180mA/idle and 2.0 amps at lock/stall
Dead Band Width:	2usec
Motor Type:	3 pole
Potentiometer Drive:	6 Slider Indirect Drive
Bearing Type:	Top Ball Bearing
Gear Type	Metal Gears
Dimensions:	1.14" x 0.51"x 1.18" (29 x 13 x 30mm)