Walkera QR X350 PRO GPS RC Quadcopter With DEVO 10 RX703A Version |
 |
The Walkera QR X350 revolutionized the multi-rotor market upon its release in 2013 by bringing GPS stabilized mutli-rotor flight to the R/C market at an affordable price. Walkera is breaking the rules again in 2014 with the release of the all new QR X350 PRO, which boasts a whole host of new features and optimization for aerial video/FPV use.
The all new Walkera QR X350 PRO provides astonishing 25 minute flight times on the stock power system, features the all new DEVO-M flight controller providing improved stability/GPS position holding and also is "Plug and Play" compatible with Walkera's G-2D brushless camera gimbal.
The QR X350 PRO has an enhanced altitude sensor which adopts GPS technology allowing it to work out its exact position in reference to the world, this allows the QR X350 PRO to hover in a stabilized position hold mode. With a simple one switch flip or loss of signal the QR X350 PRO will fly itself back to its take-off position and land! Additionally, it offers a manual mode for the sport flyer and even an onboard low voltage warning system to alert you when it’s time to land.
This version of the QR X350 PRO comes completely ready to fly including the high quality, fully programmable DEVO 10 transmitter (with extended antenna providing 2KM control range), 3S 5200mAh Lipoly flight battery and balance charger. Also included is the all new G-2D brushless camera gimbal which is designed for use with Walkera's iLook HD FPV camera and also the GoPro Hero 3. The G-2D is pre-tuned from the factory requiring no setup, simply bolt on to the bottom of the QR X350 PRO, install your iLook or GoPro Hero 3 camera and you're ready to shoot professional stabilized aerial video!
Walkera QR X350PRO GPS FPV RC Quadcopter With DEVO 10 new version
- High capacity 3S 5200mAh battery provides 25 minute flight times.
- Improved precision flight control system.
- FatShark glass compatible
- GPS altitude hold system, realize hover function once the model leaves hands.
- G-2D brushless camera gimbal (compatible with iLook and GoPro Hero 3)
- Taking off and landing steadily to get a new flight experience
- One key go home, the copter can automatically land at the home position by radio switch
- Failsafe to return home and landing
- Altitude sensor, adopt GPS / altitude hold technology to make a relative hover and lock the correct altitude
- Stable mode with GPS and altitude hold.
- Adopt anti-vibration camera mount(optional), suit for GoPro camera (not included)
- Anti-vibration camera mount can do multi-angle direction control, maximum ensure shoot picture quality (purchase separately)
- Low voltage protection.
- Easy to see LEDs
- Upgrade to FPV system, the QR X350 can upgrade to WALKERA FPV system, the pilot can enjoy the first person view fun flight.
DEVO 10
- The DEVO 10 adopts 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology and features automatic ID binding and ID assignment. It can also be customizedly set as fixed ID code
- Up to 2Km control range
- USB online update makes you always enjoy the latest firmware
- Adjustability of hi-frequency output power enjoys more personality and friendly environment
- Wireless data transmission between two DEVO 10 helps experience the training function
- Up to 30-model data can be saved
- DEVO 10 adjusting the gyro sensitivity makes hovering flight and fancy flight in an easy way
- Shape design accords with human engineering and provides comfortable holding
- Both the length and tension of the sticks can be adjustable
- DEVO 10 can be freely switched among Modes 1, 2,3 and 4
- DEVO 10 is suitable for Helicopter and Airplane. In the Helicopter mode, three are threeflight modes, each of which can be freely set and its parameters can be personalizedly adjusted to meet the requirement for F3C or 3D aerobatic flight.

Walkera QR X350Pro GPS RC Quadcopter
- Main rotor dia.: 556mm
- Main rotor length: 206mm
- Main motor: WK-WS-28-008A
- Battery: 11.1V 5200mAh Li-Po
- Flight time: approx. 20 - 25minutes
- Flying weight: 1000g
- Brushless ESC: WST-15A (G/R)
- Receiver: DEVO-RX703
- Devo M main control board
- Number of channels: 5CH up (DEVO 7, 8S, 10, 12S)
- Rotor type: quad-copter
- Dimension: 289*289*200mm
- Brushless Gimbal support: G-2D (compatible with iLook and GoPro Hero 3)
Devo 10
- Encoder: 10-channel micro computer system
- Frequency: 2.4GHz DSSS
- Output power: 10mW
- Current drain: 200mA (100mWh)
- Transmitter power supply: NiMH12V 1600mAh
- Output pulse: 1000 - 2000Ms (1500 Neutral)
- QR X350 Pro Quadcopter
- DEVO 10 New Version transmitter
- G-2D camera gimbal
- Receiver(DEVO-RX703) A version
- 11.1V 5200mAh Li-Po battery
- Li-Po battery charger
- Coach Cable
- USB cable x 2
- Bind plug
- Mini slotted driver
- Hexagon werch x 3
- Instruction manual CD
|
 |