Castle Creations Phoenix-10 amp Sensorless ESC for Brushless motors This speed control is specifically designed for Brushless application. NOT to be used with Brushed motors. Doing so will ruin ESC.
Extremely low resistance (.013 Ohm)
High rate (11kHz) switching
Up to 10A continuous current with proper air flow, 15A surge
Five to eight cells with four micro servos
p to ten cells with three micro servos
16 cells max with BEC disabled
Dynamic braking ensures folding props fold properly
BEC (1.5A) provides power to receiver and servos-eliminates need for
a separate receiver battery
User programmable features:
Low voltage cutoff
Auto-LiPo setting automatically sets 3V/cellfor 2-4 cell LiPo packs
Over-current protection
Brake type
Throttle range
Timing advance
Cutoff type
Soft start ramp up
Runs motor in forward or reverse
Auto motor in cutoff with reset
Safe power on arming program ensures motor won't accidentally turn ON
Low torque soft start prevents damage to fragile gearboxes
Auto Shut Down when signal is lost or radio interference becomes severe
Weight (Without Connectors): | 3.17 gm (1.12 oz)
|
| Length: | 25.4 mm
|
Height: | 3mm |
Weight: | 19mm |
Wire Length: | 102nn (motor end)
140mm (battery end)
140mm (servi wure w/ universal connecter)
|
- Phoenix 10A Speed Controller
- Sticker - Castle Logo x 1
- ESC programming Card
- English Instruction Manuel
|  |
